How to Enter and Exit Fastboot Mode on Any Xiaomi Phone.

Boot Xiaomi Into Fastboot Mode. The guide below will show you how to boot Xiaomi phones into fast boot mode. Fastboot is needed if you are going to do flashing or unlock the bootloader. So, the Xiaomi cellphone must go into fast boot mode so that the process can work. This guide applies to all Xiaomi smartphones. 

When fast boot is activated, you can modify the Android system image file from a PC using a USB cable. So that the firmware update process or unlock the bootloader can run quickly without using recovery mode.

Then how do you enter fast boot mode on Xiaomi phones?

Enter Fastboot Mode.

1. Turn off your Xiaomi phone.
2. Once the phone is completely powered off, press and hold the following two buttons simultaneously.

• Volume down button + Power button

3. Release all button when the fastboot logo comes up on the screen.
4. Now, you should see the Xiaomi fastboot logo with Mi Bunny on the screen. It's means You are in the fastboot mode now

Exit Fastboot Mode.

1. In fastboot mode, you cannot operate Xiaomi phones for other purposes. The cellphone can only be connected to a computer using a USB cable for flashing.
2. You also cannot turn off the Xiaomi phone by pressing the power button briefly. So, how do I exit Fastboot mode?
3. Now, hold down and press the power button for about 10 seconds.
4. Do not release the power button until you see the Mi logo appear on the screen.
5. After the Mi logo appears, release the power button.
6. Xiaomi phone will power off, and immediately normally booting.

Share this post