Flash LG K10 (2017) to Unbrick Using LG Flashtool KDZ Method.

Flash LG K10 (2017). This is a step by step tutorial on how to flash stock firmware on LG K10 2017. By flashing the stock firmware into the LG device, you can fix your phone from a boot loop or brick. There are several possibilities that cause your LG phone to become a boot loop. For example, you have flashed a custom ROM to the latest version before the manufacturer release it. The current custom ROM will bring many bugs that can cause the Android operating system malfunction. so in the end, your phone becomes brick. The only way to overcome this is flash stock firmware to restore to its original state. And now, guidebelajar offer a full LG K10 (2017) firmware with the step by step flashing tutorial.

Before this tutorial go further, Now we will show LG K10 (2017) specifications. This phone has several versions, LG X400, and LG M250N. This device released 2017, February. Comes with 5.3 inches IPS LCD capacitive touchscreen, 16M colors. Powered by Octa-core 1.5 GHz Cortex-A53, MediaTek MT6750 chipset, and Mali-T860MP2 GPU. Also supported with 2 GB of RAM. LG K10 2017 has 13 MP on primary camera and 5 MP on secondary camera. This phone runs on Android 7.0 (Nougat).

If you are ready, let us proceed with the stock installation step.

Preparation.

1. This tutorial can only be applied to LG K10 (2017), make sure your device is as required, to avoid fatal damage.
2. Before proceeding, make sure your battery fully charged. to avoid the Android system shutdown because it runs out of battery.
3. Make sure no Antivirus runs on your computer or PC to avoid the LG flash tool 2014 blocked.
4. If LG driver is not already installed, please download and install via this link. Here
5. Then, we need LG Flashtool 2014 to help flash stock firmware to the phone. You can download LG flash tool 2014 via this link. Here
6. Finally, you need to download The LG K10 2017 firmware or Stock ROM. We offer two methods of how to download it.
• first, you need to copy your device's IMEI number, and then the internet browser (Google Chrome, etc). For instruction how to download LG firmware with IMEI number, you can follow this link. 
7. Second, you can go to the available link below to download the LG K10 2017 stock firmware.
• LG X400 aka LG MK121L - Here 
• LG M250N - Here 

As the alternative methods, you can flash your LG K10 (2017) with LG UP and Uppercut, Use this tutorial.

Flashing Tutorial.

1. The full backup is required before you flash stock firmware the LG K10 2017. You can use this tutorial on how to back up your data on an Android phone. Here
2. Make sure all required files above already installed on the computer. (LG flash tool and LG driver)
3. Copy or move LG K10 (2017) stock firmware in the same folder as the LG Flashtool folder.
4. Then, launch the LG Flash tool 2014 as administrator. You can do it by following this step.
• Go to LG flashtool2014.exe
• Right-click with your mouse
• Select/click run as Administrator.
5. If LG flashtool2014 can't open, you may need to install Visual C ++ Runtime Library. Download Here and then try the previous step again.
6. For the next flash step please see the following tutorial, How to flash kdz firmware format using the LG flashtool?

Share this post