How to Flash Stock ROM Samsung GALAXY TAB S2 9.7 WI-FI (SM-T810) Using ODIN.

Flash Samsung GALAXY TAB S2 9.7 WI-FI. This guide will show you how to flash or install a new stock ROM or Firmware on Samsung GALAXY TAB S2 9.7 WI-FI using Odin V3.10.7 software. This Samsung smartphone type uses Wi-Fi only (SM-T710) and uses 3G/LTE (SM-T810) to connect the network, and Available Released on 2015, July. Ths device only launched at this specific countries, such as :France, China, Iraq, Baltic, Chile, South Africa, United Arab Emirates, Open Austria, Trinidad And Tobago, Brazil, Colombia, Taiwan, Panama, Bulgaria, Hongkong, Slovenia, Slovakia, Czech Republic, Turkey, Romania, Portugal, South East Europe, Peru, Germany, Netherlands, Spain, Greece, Italy, Hungary, Nordic Countries, United Kingdom, And many other countries.

Samsung GALAXY TAB S2 9.7 WI-FI is the smartphone with 8,0 Inch Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v5.0.2 (Lollipop), supported with Quad-core 1.9 GHz & quad-core 1.3 GHz CPU, combined with 3 GB of RAM and 8 MP of  Main camera and 2,1 MP on secondary camera. 

Initial Step To Flash Samsung GALAXY TAB S2 9.7 WI-FI

Now, we have reached on the beginning guide, so you must to do initial step to ensure everything run smoothly.

1. Make sure your Samsung GALAXY TAB S2 9.7 WI-FI battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
2. Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
3. Make sure you have installed a Latest of Driver Samsung  that support your Smartphone, If you don't have, please download here 
4. Original USB cable driver for your Samsung GALAXY TAB S2 9.7 WI-FI
5. Download Samsung Smart Switch, Here 
6. Download Odin V3.10.7, Here 
7. Firmware Samsung GALAXY TAB S2 9.7 WI-FI, you must Log In to download firmware via this link.
• SM-T810 (Wi-Fi) - Ukraine, Kyivstar, Russia, Nordic Countries, Germany, Argentina, Trinidad Tobago, Canada, Chile, Panama, Colombia, Peru, Brazil, Peru, Open Austria, Greece, Italy, Baltic, Hungary, Iraq, Turkey - Here.  
• SM-T815 (3G/LTE) - Saudi Arabia, South Africa, Morocco, Iraq, Poland, Slovenia, United Kingdom, Luxembourg, Baltic, Open Austria, France, Greece, Switzerland, Spain - Here 

Main Guide To Flash Samsung GALAXY TAB S2 9.7 WI-FI

1. You must download all necessary file. (Samsung USB driver or Smart Switch and Odin)
2. Then you must install all driver or Samsung smart switch to your computer or PC.
3. Extract Odin V3.10.7. file in the destination folder.
4. To download Samsung firmware you must visit Sammobile, you can download specific firmware file for your device model number. you must Log In with your registered account on this website.
5. On the row menu at the top of the page, you can select firmware.
6. Then you must enter in the search bar with your phone model number.
7. Then select your country.
8. Then you click on appear link.
9. Select regular download.
10. And Download button again. Approximately file size is 1,3 GB
11. Wait until your file finishes downloading, after that you must extract all firmware file on a specific folder on your computer.
12. This is your file.
13. Switch Off your Samsung GALAXY TAB S2 9.7 WI-FI to start flashing process.
14. Then, you must run Odin3 v3.10.7 by right click on Odin.exe and select Run as Administrator.
15. When the program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
16. Now your firmware file has been inserted in Odin3 
17. Then, Enter download mode your Samsung GALAXY TAB S2 9.7 WI-FI by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button until your phone vibrates and LCD show menu.



Download Mode GALAXY TAB S2 9.7 WI-FI

18. And you will see pictures like this on your LCD screen.



Download Mode GALAXY TAB S2 9.7 WI-FI

19. On this mode, now you must connect your Samsung GALAXY TAB S2 9.7 WI-FI to your PC / laptop using a USB cable. 
20. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
21. Make sure re-partition is NOT ticked
22. When everything already you can click Start Button. at the bottom left corner
23. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
24. When complete it will display a notification PASS and your smartphone Samsung GALAXY TAB S2 9.7 WI-FI will automatically restart.
25. Wait for your device to boot up, it will take a while.
26. When your Samsung GALAXY TAB S2 9.7 WI-FI is ready to use, you can check your firmware update version by dial *#1234# on the dial pad.



dial pad Samsung GALAXY TAB S2 9.7 WI-FI

27. And you will see your new firmware version.



firmware version Samsung GALAXY TAB S2 9.7 WI-FI

28. Finish.

Share this post