Guide | How to Flash or Install Firmware on Motorola RAZR HD XT925. - Android Guide

Guide | How to Flash or Install Firmware on Motorola RAZR HD XT925.

Guide | How to Flash or Install Firmware on Motorola RAZR HD XT925.

Flash Motorola RAZR HD XT925. To run your Android device well the manufacturer has embedded a firmware into their device. By simple definitions firmware will drive your hardware to run perfectly. To upgrade a firmware just simply update it over the air or by manual method. So, if you want to update your firmware or your firmware have a problem, you can follow this guide below to solve it. Below you can find guide how to flash or install firmware on Motorola RAZR HD XT925. To install or flash the firmware into Motorola RAZR HD XT925 we need to download and install RSD Lite on the computer. 

Before we proceed this guide, let we know what is Motorola RAZR HD XT925 specifications. This device known as Motorola Razr HD LTE and released on 2012, September. With 4.7 inches Super AMOLED capacitive touchscreen, 16M colors, powered by Dual-core 1.5 GHz CPU, Supported by 1 GB internal memory, 8 MP primary camera, 1,3 MP secondary camera. And run on Android OS, v4.0.4 (Ice Cream Sandwich), upgradable to v4.4.2 (KitKat).

Let we start our guide below. 

First Step.

  1. Flashing process will erase all data, account, and file on Motorola RAZR HD XT925 internal memory.
  2. To avoid the process fail, don't let your battery on empty state.
  3. Make sure to use original USB cable to ensure good connections between Motorola RAZR HD XT925 and computer.
  4. Driver for Motorola RAZR HD XT925 must installed correctly, if you don't have the driver yet please download via this link below.
  5. https://androidmtk.com/download-motorola-usb-drivers
  6. Then you must download and install RSD lite Multi Flash tool from here.
  7. http://rsdlite.com/rsd-lite-download/
  8. Now, download Motorola RAZR HD XT925. firmware file.
    • Select your appropriate firmware from link below
    • https://firmware.center/firmware/Motorola/RAZR%20HD%20%28XT925%29/

Second Step. Flashing Guide.

  1. Now, boot Motorola RAZR HD XT925 device to bootloader mode. How to do it ?
    • Power off the Motorola RAZR HD XT925, by press and hold power button for a seconds, it will completely turn off the device.
    • Now, press and hold both volume down + volume up button.
  2. Now, connect your Motorola RAZR HD XT925 to the computer via USB cable.
  3. Make sure your Motorola RAZR HD XT925 successfully detected on your computer via bootloader mode.
  4. If failed, try to use original USB cable or change your computer port.
  5. Then, Open your RSD Lite software from start menu.
    rsd lite flash tool
    rsd lite flash tool
  6. Click the button assigned with red circle show at picture above to load Motorola RAZR HD XT925 firmware.
  7. Firmware file should have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
  8. Once your Motorola RAZR HD XT925 firmware successfully load, RSD lite flash tool should look like picture shown below.
    rsd lite
    rsd lite
  9. Now click start button. to begin the flashing process.
  10. Flashing process will start automatically without your interference.
  11. Wait a while until flashing your Motorola RAZR HD XT925 finish.

Advertisement

Subscribe to receive free email updates:

0 Response to "Guide | How to Flash or Install Firmware on Motorola RAZR HD XT925."

Post a Comment