Hard Reset LG V50 ThinQ 5G Using Hardware Key.

Factory Reset LG V50 ThinQ 5G. There are several types of methods that you can do to perform a hard reset on an Android phone. If you can still access the settings menu, a hard reset can be done from the factory reset settings menu. But, if your cellphone is locked by a password then you have to use another method. When your cellphone is locked, you will only see a locked screen. You must enter the correct password.

Because the cellphone is locked, you cannot access the home screen to open the settings menu. So, to unlock the cellphone you have to perform a hard reset or master reset.

Now, we will show you how to perform a hard reset on LG V50 ThinQ 5G using hardware button. This button located on the side of the cellphone.

Little information about this cellphone, this phone released 2019, May. Comes with 6,4 Inches P-OLED capacitive touchscreen, 16M colors. Run-on Android 9.0 (Pie); LG UX 8.0 Operating system. This phone powered by Non-removable Li-Po 4000 mAh battery.

So, now let's see how to perform a hard reset.

Hard Reset LG V50 ThinQ 5G.

Warning. Hard reset will erase everything on your phone, please backup it first as soon as possible.

1. Recheck your cellphone battery status, make sure it is fully charged so that the Android system stays on during the hard reset process.
2. The cellphone must be turned off because we will perform a hard reset through the factory data reset mode. This mode can only be accessed using certain keys when the phone is turned off.
3. When the phone is completely power off, wait a few minutes then turn it on again. To power on this phone again, please use the following key combination together

• Power Button + Volume Down Button. 

  

  hard reset LG V50 ThinQ

4. If your phone shows the LG V50 ThinQ 5G Logo, you must release the Power button only for a second and then immediately press it again.

   

   LG V50 ThinQ Logo
5. Now, release all button when your phone enters the factory data reset mode.

   

   LG factory data reset mode

6. Once your phone enters this mode, you can see two menus (No and Yes). Use both of volume button to highlight it, and power button to confirm.
7. Now, press the volume down button to highlight Yes.
8. Then, press the power button to confirm it.
9. To continue deleting all data and returning to factory settings, select Yes. at this stage, all data, files, and settings made by the user will be deleted. So, consider well before confirmation
10. Please wait for the hard reset process to complete.
11. The hard reset process runs for 2 or 3 minutes, then the device will reboot.
12. Until at this step you have successfully performed a hard reset or master reset on the LG V50 ThinQ. now your cellphone is in factory settings. So, you need to make initial setup so that the phone is ready for use

Share this post