How to Flash Firmware Samsung GALAXY VIEW SM-T670 (WI-FI ONLY) Using ODIN v3.10.7

Flash Stock Samsung GALAXY VIEW. This article guides to flash a stock ROM on Samsung GALAXY VIEW using Odin V3.10.7 software. Before you decide to use this guide, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air). Only use this guide if you are 100% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This Samsung Android device is released in 2015, October. and available at specific countries, such as; Hongkong, Nordic Countries, Israel, Morocco, Taiwan, Malaysia, Vietnam, United Kingdom, etc. Samsung GALAXY VIEW SM-T670 (WI-FI ONLY) is the smartphone with 18,4 Inch TFT capacitive touchscreen, 16M colors, work on Android OS, v5.1.1 (Lollipop), with Octa-core 1.6 GHz Cortex-A53 CPU, Mali-T720MP2 GPU, combined with 2 GB of RAM and 2,1 MP of  Main camera and no secondary camera. 

Initial Step To Flash Samsung GALAXY VIEW SM-T670 (WI-FI ONLY) 

Now, we have reached on the beginning guide, so you must to do the initial step to ensure everything run smoothly.

1. Make sure your Samsung GALAXY VIEW SM-T670 (WI-FI ONLY) battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
2. Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
3. Make sure you have installed a Latest of Driver Samsung  that support your Smartphone, If you don't have, please download here 
4. Original USB cable driver for your Samsung GALAXY VIEW SM-T670 (WI-FI ONLY)
5. Download Samsung Smart Switch, Here 
6. Download Odin V3.10.7, Here  
7. Firmware Samsung GALAXY VIEW, you must Log In to download firmware via this link.
• SM-T670- Mexico, Chile, Colombia, Peru, Brazil, Korea, Cellular South, France, Bulgaria, Taiwan, Hong Kong, Canada, Nordic Countries, Israel, Malaysia, United Kingdom, Saudi Arabia, United Arab Emirates, Thailand, Singapore, Philippines, Germany, Spain, Netherlands,  Here.

Main Guide To Flash Samsung GALAXY VIEW SM-T670 (WI-FI ONLY) 

1. You must download all necessary file. (Samsung USB driver or Smart Switch and Odin)
2. Then you must install all driver or Samsung smart switch to your computer or PC.
3. Extract Odin V3.10.7. file in the destination folder.
4. To download Samsung firmware you must visit Sammobile, you can download specific firmware file for your device model number. you must Log In with your registered account on this website.
5. On the row menu at the top of the page, you can select firmware.
6. Then you must enter in the search bar with your phone model number.

   

   Flash Stock ROM Samsung GALAXY VIEW SM-T670 (WI-FI ONLY)

7. Then select your country.
8. Then you click on appear link.
9. Select regular download.
10. And the Download button again. Approximately file size is 1,2 GB
11. Wait until your file finishes downloading, after that you must extract all firmware file on a specific folder on your computer.
12. This is your file.

    

    Flash Stock Firmware On Samsung GALAXY VIEW SM-T670 (WI-FI ONLY)

13. Switch Off your Samsung GALAXY VIEW SM-T670 (WI-FI ONLY) to start flashing process.
14. Then, you must run Odin3 v3.10.7 by right click on Odin.exe and select Run as Administrator.
15. When the program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
16. Now your firmware file has been inserted in Odin3 
17. Then, Enter download mode your Samsung GALAXY VIEW SM-T670 (WI-FI ONLY) by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button until your phone vibrates and LCD show menu.



Download mode Samsung GALAXY VIEW SM-T670 (WI-FI ONLY)

18. And you will see pictures like this on your LCD screen.



Download Mode GALAXY VIEW SM-T670 (WI-FI ONLY)



19. On this mode, now you must connect your Samsung GALAXY VIEW SM-T670 (WI-FI ONLY) to your PC / laptop using a USB cable. 
20. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)

    

    Port Com Samsung GALAXY VIEW SM-T670 (WI-FI ONLY)

21. Make sure re-partition is NOT ticked
22. When everything already you can click Start Button. at the bottom left corner
23. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
24. When complete it will display a notification PASS and your smartphone Samsung GALAXY VIEW SM-T670 (WI-FI ONLY) will automatically restart.
25. Wait for your device to boot up, it will take a while.
26. When your Samsung GALAXY VIEW SM-T670 (WI-FI ONLY) is ready to use, you can check your firmware update version by dial *#1234# on the dial pad.

    

    dial pad Samsung GALAXY VIEW SM-T670 (WI-FI ONLY)

27. And you will see your new firmware version.

    

    firmware version Samsung GALAXY VIEW SM-T670 (WI-FI ONLY)

28. Finish.

Share this post