How To Flash or Install Stock Rom On Bricked / Bootloop Micromax Canvas A1 AQ4502.

Install Stock Rom Micromax Canvas A1 AQ4502. (This guide just for Micromax Canvas A1 AQ4502) Guidebelajar on this guide will explain to you how to flashing android device on Micromax Canvas A1 AQ4502 with an easy and simple step. This phone comes with IPS LCD capacitive touchscreen 16 M colors, 4,5 Inches wides, Android OS, v5.1 (Lollipop) and supported with MediaTek MT6582 chipset, Quad-core 1 GHz CPU Cortex A7, Mali 400MP2 GPU, combined with 1 GB of RAM as their engine. And you can enjoy exciting 5 MP on the main camera, and 2 MP on secondary camera. And this devices released 2015, June.

Flash Bricked / Bootloop Micromax Canvas A1 AQ4502.

Flashing in android is the same way as a fresh install on the windows PC, So by performing a flash on Android, you will give a new performance like a new phone. One reason that you should perform a flash your android is because your Android gets bootloop or when you failed to install Stock ROM Mod.

Now, follow the instructions list below, do it with your own risk.

Prepare Flash Micromax Canvas A1 AQ4502.

1. A computer with Windows OS,
2. Original USB Cable Micromax Canvas A1 AQ4502
3. MTK Driver_Auto_Installer_v5.1453.03, Here
4. SPFlash Tool for Windows Here  
5. Stock Rom Lollipop For Micromax Canvas A1 AQ4502. Here 
6. To ensure what is firmware used by your device now, you can check by going to Setting ->About -> Software Information ->Build Number.

Flashing Micromax Canvas A1 AQ4502.

1. At the first time, download the linked file from above. 
2. If your Micromax Canvas A1 AQ4502 in normal condition, Power Off now
3. But, If your device in a bootloop state, you can try a reboot to stock recovery by pressing both volume up and power button, then press the power down option to turn off your phone.
4. Remove the battery from your phone.
5. Extract and install MTK Driver_Auto_Installer_v5.1453.03.
6. Then extract SPFlash Tool for windows, and run as administrator on flashtool.exe
7. Once SP Flashtool is launched, click on the download tab.
   

   

   sp flash tool - download tab

8. Then click scatter load. find Micromax Canvas A1 AQ4502 scatter storage location earlier. (the scatter file can be found by extracting 'Micromax Canvas A1 AQ4502 stock ROM lollipop.rar')
9. In the Scatter-Loading field go to the folder where you extracted the Flash Tool and select scatter.txt 

   

   Install Stock Rom Micromax Canvas A1 AQ4502.

10. Then you click options ->Download -> then check DA DL all with a checksum.

    

    Install Stock Rom Micromax Canvas A1 AQ4502.

11. On the download tab, ensure you have selected download only option the drop-down menu, see below picture.

    

    Install Stock Rom Micromax Canvas A1 AQ4502.

12. Then, click the download button on top right and connect your Micromax Canvas A1 AQ4502 with a USB cable in phone switch off position.

    

    Install Stock Rom Micromax Canvas A1 AQ4502.

13. The process will run automatic, and you can see the red stripe showing download percentage at bellow
14. When your process complete, you can see a green circle with a tick mark. 

    

    Install Stock Rom Micromax Canvas A1 AQ4502.

15. Now disconnect your Micromax Canvas A1 AQ4502
16. Install your battery again. 
17. Then, start your Micromax Canvas A1 AQ4502. (remember, on the first booting it will take a long time to start)
18. When everything complete you must go to settings and do a factory data reset, this will make your phone go faster and becomes normal.
19. Success. enjoy

Share this post