How Fix a Bootloop LG K7 2017 By Flashing a Stock Firmware Using LG Flashtool.

How to Fix a Bootloop LG K7 2017 By Flashing a Stock Firmware Using LG Flashtool.

Flash Stock Firmware LG K7 2017. If your phone is experiencing a boot loop caused by OTA update failure, You can try to re-flash the stock firmware using this method. The following tutorial will show you how to flash new stock firmware on LG K7 2017 using the LG flash tool 2014. 

Here is the LG K7 2017 specification. This device is also known as LG K7i X230I for India, LG X230 for Russia, Kazakhstan, Poland, and Romania, LG X230K for the Philippines, LG MS330 for MetroPCS. LG K7 2017 released 2017, May. Powered by Quad-core 1.1 GHz Cortex-A53 CPU, Mediatek MT6737M chipset, Mali-T720MP2 GPU. Also supported with 2 GB of RAM and 16 GB of ROM. LG K7 2017 has 8 MP of primary camera and 5 MP of secondary camera. This phone runs on Android 6.0.1 (Marshmallow).

Ok, let's continue the flash process.

flash stock LG K7 2017

As the alternative methods, you can flash your LG K7 2017 with LG UP and Uppercut, Use this Tutorial.

Requirement.

1. Make sure your device is Android LG K7 2017, don't try to apply this tutorial to the other LG model.
2. Download LG driver from Here.
3. Download LG Flashtool 2014 from Here
4. Then, download the LG mobile support tool from Here.
5. Now, download LG K7 2017 stock firmware. There are two methods to download the LG K7 2017 stock firmware (KDZ method).
• The first method, download stock firmware using IMEI number on your mobile phone. see the following instructions to do it. Here 
6. The second method, you can visit the following link to download the LG K7 2017 stock firmware. This firmware is for LG MS330 Metro PCS. 

Step By Step Flashing a Stock Firmware.

1. Install all driver and LG flash tool 2014 on your computer before proceeding flashing the firmware.
2. Then, put the KDZ firmware in the same folder as the LG flash tool 2014.
3. Flash firmware on the boot loop phone will erase all data. Therefore we suggest backup everything stored in the phone memory.
4. Connect your phone to the computer using USB cable, and make sure it connected. if not, please check the driver already installed or not.
5. If you encounter an error during the LG flash tool installation, please download and install the following file. VC_RedistInstaller.exe
6. Now, launch the LG flash tool 2014 as administrator. How to do it?
• right click at LG Flashtool2014.exe - then click run as administrator.
7. Follow this link for detail instructions Here

Or you can watch the following video.

Share this post