How to Flash LG Stylo 3 Plus For MetroPCS With LG Flashtool - KDZ Method.

How to Flash LG Stylo 3 Plus For MetroPCS With LG Flashtool - KDZ Method

Flash Stock Firmware LG Stylo 3 Plus. Flashing the original stock firmware into your LG phone can repair your phone from the following issue. First, you can repair your LG phone from the boot loop issue. Bootloop means your phone is booting repeatedly and stops on the LG logo. Second, you can restore the factory settings, and get a performance like a new phone. If the hard reset is no longer able to handle a problem on the phone. And now, you can learn how to flash a stock firmware into your Android LG Stylo 3 Plus.

Before the flashing process proceeds, here are the LG Stylo 3 Plus specifications. This device released in 2017, May. Comes with 5.7 inches IPS LCD capacitive touchscreen, 16M colors. Powered by Octa-core 1.4 GHz Cortex-A53 CPU, Qualcomm MSM8940 Snapdragon 435 chipset, Adreno 505 GPU. Also, supported by 2 GB of RAM. This device runs on Android 7.0 (Nougat). 

This guide is for LG Stylo 3 Plus for MetroPCS.

Now, let's start this guide.
flash LG Stylo 3 Plus
flash LG Stylo 3 Plus

Prerequisite.

  1. Apply this guide on LG Stylo 3 Plus device only.
  2. Charge your phone to reach 100% completely full to avoid the system shutdown during the flashing process.
  3. Make sure there is not an Anti Virus program run on the computer.
  4. The LG driver must be installed correctly on your computer, if you do not have LG driver yet, get the driver from this link. Here
  5. Then, you need to download LG Flashtool 2014. This flash tool will flash KDZ or TOT method. LG Flashtool 2014 can be download Here
  6. Now, download LG stock firmware for LG Stylo 3 Plus. There are two methods to download the LG stock firmware.
    • Download LG Stock firmware by yourself. This method requires an IMEI number. For more instructions, you can follow this guide. Here  
    • Download LG Stylo 3 Plus stock Firmware directly from the following link.
As the alternative methods, you can flash your LG Stylo 3 Plus with LG UP and Uppercut, Use this guide.

Step By Step Flashing Guide.

Video Guide. 


  1. Always make a full back up of all data on your phone. You can use this guide to backup your phone data. Here
  2. LG flash tool and LG driver must be correctly installed on the PC.
  3. We highly recommend copy LG Stylo 3 Plus stock firmware in the same folder as the LG flash tool 2014 folder.
  4. Now, open LGflashtool2014.exe as administrator. How to open LGflashtool2014.exe as an administrator?
    • Go to program window application (Lgflashtool2014.exe)
    • Then, right-click the application with your mouse.
    • Now, click/select open command window here
  5. If LG flashtool2014 can't open, you may need to install Visual C ++ Runtime Library. Download Here and then try the previous step again.
  6. For the next instructions guide, you can visit this page. (how to use LG Flashtool to flash kdz firmware)

0 Response to "How to Flash LG Stylo 3 Plus For MetroPCS With LG Flashtool - KDZ Method."

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel