How to Flash Samsung Galaxy J7 Prime Firmware via ODIN.

How to Flash Samsung Galaxy J7 Prime Firmware via ODIN.

Flash Stock ROM Samsung Galaxy J7 Prime. You may need this guide to help fix the problem on your Samsung Galaxy J7 Prime. Most of the problems that can be solved with this problem are bootloop or soft brick. Or, may you have been failed after installing a custom ROM. At this stage, your device becomes unusable. Therefore you need to flash or install a new Firmware or Stock ROM to your phone again in order to make your phone can be used again. The following guide you can read how to flash a new Stock ROM on Samsung Galaxy J7 Prime, here we need ODIN to help write or flash a firmware to this phone.

Actually to solve a bootloop phone you don't need to flash it. Simply restore the ROM backup and it will run normally again. But, you must backup it before something wrong happens. If you don't have a backup ROM, try to flash your Samsung Galaxy J7 Prime with this guide.

Before we proceeding flash this device, here is Samsung Galaxy J7 Prime Specifications.
Specification Detail
Product Release - September 2016
Display - 5,5 Inches
- PLS TFT capacitive touchscreen, 16M colors
CPU - Octa-core 1.6 GHz Cortex-A53
GPU - Mali-T830MP2
Chipset - Exynos 7870 Octa
Operating System - Android 6.0.1 (Marshmallow)
Memory - 3 GB of RAM
Camera - 13 MP of Primary camera
- 8 MP of secondary camera.
Battery - Non-removable Li-Ion 3300 mAh battery
Version - G610F/DS (EMEA & Asia)
- G610F/DD (India, Pakistan)
- G610M/DS (Brazil)

Ok, let we start this guide.

What you need Before Flashing.

  1. Don't let your battery at empty state, at least you have 78% of battery capacity. It will avoid the Android system down during the flashing process.
  2. Warning. During the flashing process, all data, file, and a downloaded app will be deleted or wiped. Try to always make a backup. Before the unwanted things occur on your Samsung Galaxy J7 Prime. For example; bricked boot loop, or damage.
  3. Make sure your Samsung Galaxy J7 Prime is detected well on the computer or laptop. Otherwise, you must provide the compatible USB driver for your Samsung Galaxy J7 Prime. If you're not ready with this USB driver, try to download from the following link.
  4. For suggestions, always use the original USB cable. It will give a stable and good connections guarantee compared with a generic USB cable.
  5. The important tool you need to help flash or write a Stock ROM or firmware to Samsung Galaxy J7 Prime is ODIN. For the latest release of ODIN, you can get it here.
  6. For the last, you need a compatible Firmware or Stock ROM for your Samsung Galaxy J7 Prime. Firmware can be downloaded from You must be a registered user to download a free firmware from this site. The following link is the Samsung Galaxy J7 Prime (SM-G610F). Here  

Flashing Samsung Galaxy J7 Prime Guide.

Use this guide to flash your Samsung Galaxy J7 Prime via ODIN software.

Video Guide.

0 Response to "How to Flash Samsung Galaxy J7 Prime Firmware via ODIN."

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel