Guide How to Flash Firmware on Android Motorola XOOM 2 MZ615. - Android Guide

Advertisement

Guide How to Flash Firmware on Android Motorola XOOM 2 MZ615.

Guide How to Flash Firmware on Android Motorola XOOM 2 MZ615.

Flash on Android Motorola XOOM 2 MZ615. If your android system encountered a problem, and can't work properly. It's time to flash the firmware. Here you can find guide to flash firmware on android Motorola XOOM 2 MZ615, to flash a firmware into this device we must need a flash tool, therefore we must download and install RSD lite. RSD lite is flash tool specially designed for Motorola device. This flash tool is free for use, and you can download it from the official site. Before we perform flash Motorola XOOM 2 MZ615, we should understand that flashing Android device will delete all data and file stored in internal memory. So, you must back up it first.

Here is Motorola XOOM 2 MZ615 specifications,  this device Also known as Motorola XYBOARD 10.1 WiFi MZ615, released on 2011, November. With 10,2 inches HD-IPS LCD capacitive touchscreen, 16M colors, powered by Dual-core 1.2 GHz Cortex-A9 CPU, TI OMAP 4430 Chipset, and PowerVR SGX540 GPU. Supported by 1 GB internal memory, 5 MP primary camera, 1,3 MP secondary camera. And run on Android OS, v3.2 (Honeycomb), planned upgrade to v4.0.4 (Ice Cream Sandwich).

Now, let we proceed or guide to Flash Firmware on Android Motorola XOOM 2 MZ615.

First Step.

  1. Be sure to back up all data and file stored on Motorola XOOM 2 MZ615 memory
  2. Battery must has minimum 75 % of capacity.
  3. Always use original USB cable to connect between your Motorola XOOM 2 MZ615 to the computer.
  4. Make sure Motorola XOOM 2 MZ615 driver correctly installed on your computer, If you don't have this driver yet. you can download it via link below
  5. Then download and install RSD lite Multi Flash tool from here.
  6. Now, download Motorola XOOM 2 MZ615 firmware file.
    • RETAIL_7.7.1-85_MZ615-26_1FF.xml.zip Here 
    • RETAIL_7.7.1-85_MZ615-26_CFC_1FF.xml.zip Here 

Second Step. Flashing Motorola XOOM 2 MZ615.

  1. Now, boot Motorola device to bootloader mode. How to do it ?
    • Power off the Motorola XOOM 2 MZ615, by press and hold power button for a seconds, it will completely turn off the device.
    • Now, press and hold both volume down + volume up button.
  2. Now, connect your Motorola XOOM 2 MZ615 to the computer via USB cable.
  3. Make sure your Motorola XOOM 2 MZ615 successfully detected on your computer via bootloader mode.
  4. If failed, try to use original USB cable or change your computer port.
  5. Now, Open RSD Lite from start menu.
    rsd lite flash tool
    rsd lite flash tool
  6. Click the button assigned with red circle show at picture above to load Motorola XOOM 2 MZ615 firmware.
  7. Firmware file should have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
  8. Once your firmware successfully load, RSD lite should look like picture shown below.
    rsd lite
    rsd lite
  9. Now click start button.
  10. Flashing process will start automatically without your interference.
  11. Wait a while until flashing your Motorola XOOM 2 MZ615 finish.

Advertisement

Subscribe to receive free email updates:

0 Response to "Guide How to Flash Firmware on Android Motorola XOOM 2 MZ615."

Post a Comment