How To Flash / Install Firmware Lenovo A319

How To Flash / Install Firmware Lenovo A319.


Flash Firmware Lenovo A319. (This guide just for Lenovo A319) Guidebelajar on this guide will explain to you how to flashing android device on Lenovo A319 with an easy and simple stepFlashing in android is the same way as a fresh install on the windows PC, So by performing a flash on Android, you will give a new performance like a new phone.

So, If you have any problems with the phone boot loop or accidental Lenovo A319 is not installed recovery. In this guide, we're not offering recovery TWRP or Cwm. CMW is a recovery that already in recovery mode for customization of the device such that the phone with a variety of additional functions in it such as backup/restore, installations and others that are not contained in the standard recovery mode. Generally, in case of a default recovery bootloop, Lenovo A319 will go missing in case of boot loop. whereas the original recovery cannot help when there hard brick.

Now, follow the instruction list below, do it at your own risk.

Prepare Flash Lenovo A319.

  1. Firmware (Stock ROM) Lenovo A319:  
  2. Latest Version of SP flash tool :  
  3. Lenovo A319 USB Driver (MTK Driver) : 
  4. To ensure what is firmware used by your device, you can check by going to Setting ->About -> Software Information ->Build Number.

Flashing Lenovo A319.

  1. At the first time, please Install driver for Lenovo A319 that already downloaded before. 
  2. Extract the other downloaded file (firmware and flash tool) save it anywhere on your hard drive.
  3. Then remove your back case, battery, sim card, and SD Card  if installed
  4. Next, Connect your Lenovo A319 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
  5. Then, release USB data cable from the PC.
  6. Open SP flash tool software (for Windows 7 you can run it by administrator) and click scatter load. find Lenovo A319 scatter storage location earlier.
  7. In the Scatter-Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt.
    Flash / Install Firmware Lenovo A319.
    Flash / Install Firmware Lenovo A319.
  8. Then you click options ->Download -> then check DA DL all with a checksum.
    Flash / Install Firmware Lenovo A319.
    Flash / Install Firmware Lenovo A319.
  9. On the download tab, ensure you have selected download only option from the drop-down menu, see picture below.
  10. Flash / Install Firmware Lenovo A319.
    Flash / Install Firmware Lenovo A319.
  11. Then, click the download button on top right and connect your Lenovo A319 with the USB cable in phone switch off position.
  12. Flash / Install Firmware Lenovo A319.
    Flash / Install Firmware Lenovo A319.
  13. The process will run automatic, and you can see the red stripe showing download percentage at bellow
  14. When your process complete, you can see a green circle with a tick mark. 
    Flash / Install Firmware Lenovo A319.
    Flash / Install Firmware Lenovo A319.
  15. Now disconnect your Lenovo A319
  16. Install your battery again. 
  17. Then, start your Lenovo A319. (remember, on the first booting it will take a long time to start)
  18. Success. enjoy.

Download Firmware Lenovo A319

0 Response to "How To Flash / Install Firmware Lenovo A319"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel