How to Flash Kdz Firmware LG Stylus 2 Plus to Unbrick or Return to Stock.

How to Flash Kdz Firmware LG Stylus 2 Plus to Unbrick or Return to Stock.

Flash LG Stylus 2 Plus. The following guide will show you how to flash or install a new kdz firmware into your LG Stylus 2 Plus phone. Stock ROM for LG smartphone comes with kdz format, or sometimes it on Tot format. To flash the kdz firmware we need a special flash tool designed for LG smartphone device. This tool is called with LG Flash tool 2014. This tool will help us to flash firmware by load kdz file to this program. But, LG flash tool works on windows operating system only. Use this guide to flash your LG Stylus 2 Plus if your device boot loop or bricked, even you can use this guide to downgrade from the latest update release. Just follow this guide step by step carefully to avoid your phone totally damaged, and make sure to take your own risk.
I think you understand what I mean on this guide. If so, before this guide starts you can review your LG Stylus 2 Plus specs again.
  • This phone has some versions; 
    • LG K535N (HK, Taiwan)
    • LG Stylo 2 Plus MS550 (Metro PCS)
    • LG K535D (India)
    • LG Stylo 2 Plus K550 (T-Mobile)
    • LG K530F (South America)
  • LG Stylus 2 Plus released in 2016, May.
  • Comes with 5,7 Inches, IPS LCD capacitive touchscreen, 16M colors.
  • Powered by Octa-core 1.2 GHz Cortex-A53 or Octa-core 1.4 GHz Cortex-A53 CPU, Qualcomm MSM8937 Snapdragon 430 chipset, and Adreno 505 GPU.
  • Also supported by 3 GB of RAM to make your device run quickly and faster.
  • LG Stylus 2 Plus featured with 13 MP of primary camera and 8 MP of the secondary camera to make your best moment captured on this device.
  • For long life stand by this device provided by Removable Li-Ion 3000 mAh battery.
  • LG Stylus 2 Plus runs on Android 6.0 (Marshmallow), upgradable to 7.0 (Nougat).
Ok, now let we proceed this step by step guide to flash a new firmware to your LG Stylus 2 Plus phone.


1. Make sure you have a kdz firmware that appropriates with your LG phone model and type. There are many methods to get the firmware for your LG device as mentioned below.
   -  1st method, Use your phone IMEI number and favorites browser to get the firmware by yourself. read the instruction how to do it.
   -  2nd, get your kdz firmware for your LG Stylus 2 Plus with the following link below.
2. LG Flashtool 2014. Use this tool to help flash a firmware to your LG phone.
3. LG driver. This driver used to communicate with your phone and the computer.
4. LG mobile support tool and install it on your computer.

Step By Step Flashing Firmware LG Stylus 2 Plus.

1. Once all requirement tool/file above successfully downloaded on your computer local drive. Now you must unzip/extract LG and Kdz firmware at the same folder. We recommend putting these files in the desktop folder.
2. We recommend charging your battery until it full, it will avoid the Android system fail during the flashing process.
3. If your LG Stylus 2 Plus fail detected on the computer, please check your driver and make sure it successfully installed.
4. If you get a warning message during Lg driver installation, try to get and install the VC_RedistInstaller.exe 
5. If your phone successfully detected on the computer, now it's time to launch the LG flash tool 2014 as administrator. (right click at LG Flashtool2014.exe - select run as administrator).
run as administrator - flash LG stylus 2
run as administrator - flash LG stylus 2
6. Next step sees the following guide... How to flash kdz firmware via LG flashtool.

0 Response to "How to Flash Kdz Firmware LG Stylus 2 Plus to Unbrick or Return to Stock. "

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel