How to flash LG V10 H900 (AT&T), H901 (T-Mobile), VS990 (Verizon) using the TOT method.
Flash LG V10 H900, H901, VS990. Today guidebelajar will share a guide to flash LG V10 using TOT method. Actually, you can perform flash on LG Android smartphone use any method, like using the KDZ method and TOT method. So, it depends on you to use which method. When your LG Device got a boot loop or bricked, or many errors on Android system you can use this method to flash or install new firmware on your device.
Before you continue to perform a flashing on LG V10 device, you must make sure your Android device has a feature like this. LG V10 is the smartphone with 5,7 Inchi wide IPS LCD capacitive touchscreen, 16M colors, work on Android OS, v5.1.1 (Lollipop), Chipset Qualcomm MSM8992 Snapdragon 808 and supported with Quad-core 1.44 GHz Cortex-A53 & dual-core 1.82 GHz Cortex-A57 CPU, combined with 4 GB of RAM and 16 MP of Main camera and 5 MP on secondary camera.
Ok, now follow this guide how to flash your LG V10 using TOT method. And remember, do it with your own risk.
 |
| flash LG V10 TOT method |
A tool to Flash LG V10.
To flash your LG V10, you must have these tools.
- First, you must install the LG driver on your computer
- Then, install the flash tool on your PC or computer, but don't run this program yet.
- Now, extract the TOT file from the ZIP. Put on the specified folder on your computer.
- Then, Power off your device. by the press and hold the power button for a second, and release button when LG V10 vibrate.
- Now, Press and hold the Volume UP button and plug in the USB cable to your phone you should now see “Firmware Update/Download Mode” and be in Download mode.
- Now, Open device manager
- click start
- right click on my computer
- select properties
- This will open System windows
- click device manager
- Then click "Ports (COM & LPT)". If a driver is installed properly, you will see "
LGE Mobile USB Serial Port (COM)"
 |
| flash LG V10 |
- Then you can Double-click on "LGE Mobile USB Serial Port (COM)"
- Click Port Settings> Advanced > beside the "COM Port Number:" select "COM11",
 |
| flash LG V10 |
- Now, Disconnect the USB cable, wait a few seconds and then plug it in again to make sure the drivers no problem.
- Next step is Install LG Flash Tool, but leave it don't open this program.
- On the LG Flash Tool Folder, there is a file "MegaLock.dll", right-click the file and then copy and paste into LG Flash Tool installation folder, usually, you can find this folder in C: \ LG \ LGFlashTool then replaces the original file.
- Now you can Run Flash Tool, check the Select Manual Mode, (1).
 |
| LG flash tool |
- Click on "..." to the .dll file that is in the folder, LG Flash Tool. (2)
- Set S / W to stock firmware downloaded file .tot (3)
- Then select UPGRADE DL.
- Now you can click the Start button with "Yellow Arrow" sign,
 |
| flash LG V10 |
- If you see READY!!, then reconnect your phone. Then "Waiting for Connection" text will appear in the COM41 window.
 |
| READY message on LG flash tool |
- Disconnect a USB Cable for a few seconds and then reconnect again.
- After your USB Cable is connected, your phone will flash,
- During the flashing process, the phone will reboot itself and will display "MiniOS Factory Reset Status". Sometimes it occurred at 80% of the process then LG V10 will shut off, don't worry about it.
- You can leave this process
- Just leave it, and then it will say "PASS !!" on screen.
 |
| Pass Message on LG flash tool |
- Its mean flashing process is completed and successful.
- Disconnect a cable and remove the batteries,
- For a few seconds re-insert the battery and turn On your LG V10.
- If your LG V10 does not go to turn on. You can turn it on by pressing the Power button and Volume Down (-), until you can see the LG Release Button and Factory Reset, select reset and then the phone will reboot and starts normally.
0 Response to "How to flash LG V10 H900 (AT&T), H901 (T-Mobile), VS990 (Verizon) using the TOT method."
Post a Comment