Guide How to Flash Firmware on Motorola RAZR D1 With RSD Lite. - Android Guide

Guide How to Flash Firmware on Motorola RAZR D1 With RSD Lite.

Guide How to Flash Firmware on Motorola RAZR D1 With RSD Lite.

Flash Firmware on Motorola RAZR D1. Right here we would to explain you how to flash or install a new firmware onto Motorola RAZR D1 using RSD Lite flash tool. RSD or Remote Software Download is a Motorola tool that help us to flash a firmware. Use this guide to fix a bricked or bootloop Motorola RAZR D1 device. Or you can use this guide to update Motorola RAZR D1 device that is no longer getting Operating System updates direct (Over the Air) from the phone manufacturer. Simply just download a firmware and the others tool from the available link below. Then save it on your local computer or laptop.

To proceed this guide you must know about this Motorola RAZR D1 versions ;
  • Motorola RAZR D1 XT914 (LATAM), 
  • Motorola RAZR D1 XT915 (Single SIM), 
  • Motorola RAZR D1 XT916 (Dual SIM), 
  • Motorola RAZR D1 XT918 (Dual SIM, TV)
This device is released on 2013, March. With 3.5 inches TFT touchscreen. powered by 1.0 GHz Cortex-A9 CPU,Mediatek MT6575M chipset, PowerVR SGX531 GPU, Supported by 1 GB internal memory, 5 MP primary camera, no secondary camera. And run on Android OS, v4.1 (Jelly Bean), up-gradable to v4.4.2 (KitKat).

Let's we start our guide below

#1 Step.

  1. To avoid your data and file saved on  Motorola RAZR D1 lose during flashing process, try to back up it first 
  2. Try to keep your battery power at 80% of full charged.
  3. For best suggestions we recommend to use an original USB cable to connect your Motorola RAZR D1 to the computer.
  4. Make sure driver for Motorola RAZR D1 installed correctly, if you don't have the driver yet please download via this link below.
  5. https://androidmtk.com/download-motorola-usb-drivers
  6. Download and install RSD Lite Multi flash to the computer or laptop.
  7. http://rsdlite.com/rsd-lite-download/
  8. Here you can download Motorola RAZR D1 firmware file. (choose appropriate file according your phone versions)
    • Motorola RAZR D1 XT914 (LATAM)
    • https://firmware.center/firmware/Motorola/RAZR%20D1/Stock/XT914/
    • Motorola RAZR D1 XT915 (Single SIM)
    • https://firmware.center/firmware/Motorola/RAZR%20D1/Stock/XT915/
    • Motorola RAZR D1 XT916 (Dual SIM)
    • https://firmware.center/firmware/Motorola/RAZR%20D1/Stock/XT916/
    • Motorola RAZR D1 XT918 (Dual SIM, TV)
    • https://firmware.center/firmware/Motorola/RAZR%20D1/Stock/XT918/

#2. Flashing Motorola RAZR D1.

  1. Now, boot Motorola RAZR D1 device to bootloader mode. How to do it ?
    • Power off the Motorola RAZR D1, by press and hold power button for a seconds, it will completely turn off the device.
    • Now, press and hold both volume down + volume up button.
  2. Now, connect your Motorola RAZR D1 to the computer via USB cable.
  3. Make sure your Motorola RAZR D1 successfully detected on your computer via bootloader mode.
  4. If failed, try to use original USB cable or change your computer port.
  5. Then, Open your RSD Lite software on your computer from start menu.
    rsd lite flash tool
    rsd lite flash tool
  6. Click the button assigned with red circle show at picture above to load Motorola RAZR D1 firmware.
  7. Firmware file should have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
  8. Once your Motorola RAZR D1 firmware successfully load, RSD lite flash tool should look like picture shown below.
    rsd lite
    rsd lite
  9. Now click start button. to begin the flashing process.
  10. Flashing process will start automatically without your interference.
  11. Just wait a while until flashing your Motorola RAZR D1 done.

Advertisement

Subscribe to receive free email updates:

0 Response to "Guide How to Flash Firmware on Motorola RAZR D1 With RSD Lite."

Post a Comment