How to Flash / Install Firmware Samsung GALAXY J1 (2016) Using ODIN v3.11.1 | Android Guide. - Android Guide

How to Flash / Install Firmware Samsung GALAXY J1 (2016) Using ODIN v3.11.1 | Android Guide.

How to Flash / Install Firmware Samsung GALAXY J1 (2016) Using ODIN v3.11.1 | Android Guide.

Flash Stock Firmware Samsung GALAXY J1 (2016). This device also known as Samsung Galaxy J1 (2016) Duos with dual-SIM card slots, and this device has some version, they are ; J120F (Global), Galaxy Express 3 J120A (AT&T), J120H, J120M, J120M, J120T. When your device bootloop or bricked, you can follow this guide to flash a new firmware into your Samsung GALAXY J1 (2016). We need ODIN v3.11.1 to flash a firmware. Before following this guide below, make sure you know about the risks involved in flashing your device. If you not sure yet, we recommend using Samsung’s own utilities OTA (Over-the-air) or Samsung Kies.

This device is released on 2016, January. Samsung GALAXY J1 (2016) is the smartphone with 4,5 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v5.1.1 (Lollipop), Supported with Quad-core 1.3 GHz Cortex-A7 CPU, Spreadtrum SC9830 chipset, Mali-400 GPU, combined with 1000 MB of RAM and 5 MP of  Main camera and 2 MP on secondary camera. 

Preparation.

Below is the following things you must do before flashing your Android Samsung Smartphone device.
  1. Make sure your Samsung GALAXY J1 (2016) is fully charged. or minimum has 88 % of battery capacity. It will avoid the flashing process failure.
  2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
  3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here 
  4. http://www.mediafire.com/download/p6pplwvwtc9y4kk/SAMSUNG_USB_Driver_for_Mobile_1.5.5.0.rar
  5. Original USB cable driver for your Samsung GALAXY J1 (2016).
  6. Download Odin V3.11.1, Here 
  7. http://dl.sammobile.com/Odin3-v3.11.1.zip
  8. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit samsung-updates.com/
  9. Or you can read Guide How to Download Official Samsung Firmware From SamMobile. Here 
  10. http://guidebelajar.blogspot.com/2016/08/guide-how-to-download-official-samsung-firmware.html
  11. Firmware Samsung GALAXY J1 (2016), you must Log In to download firmware via this link below.
  12. http://guidebelajar.blogspot.com/2016/10/official-firmware-samsung-galaxy-j1-2016.html

Guide To Flash Samsung GALAXY J1 (2016) 

  1. You must download all necessary file.(Samsung USB driver and Odin)
  2. Then, install all driver to your computer or PC.
  3. Extraxt Odin V3.11.1. file on the destination folder.
  4. Switch Off your Samsung GALAXY J1 (2016) to start flashing process.
  5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY J1 (2016)
    Flash Stock Firmware On Samsung GALAXY J1 (2016)
  6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
    Flash Stock Firmware On Samsung GALAXY J1 (2016)
    Flash Stock Firmware On Samsung GALAXY J1 (2016)
  7. Now your firmware file has been inserted in Odin3 
  8. Then, Enter download mode your Samsung GALAXY J1 (2016). See this guide how to do it.
  9. http://guidebelajar.blogspot.com/2016/08/guide-how-to-enter-download-mode-on.html
  10. On this mode, now connect your Samsung GALAXY J1 (2016) to your PC / laptop using a USB cable. 
  11. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
    Enter download mode samsung GALAXY J1 (2016)
    Port Com Samsung GALAXY J1 (2016)
  12. Make sure re-partition is NOT ticked
  13. When everything already you can click Start Button. at the bottom left corner
  14. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
  15. When complete it will display a notification PASS and your smartphone Samsung GALAXY J1 (2016) will automatically restart.
  16. Wait your device to boot up, it will take a while.
  17. When your Samsung GALAXY J1 (2016) is ready to use, now check your firmware version. See this guide how to check it. 
  18. http://guidebelajar.blogspot.com/2016/08/how-to-check-samsung-galaxy-firmware-version.html
  19. Finish.

Advertisement

Subscribe to receive free email updates:

0 Response to "How to Flash / Install Firmware Samsung GALAXY J1 (2016) Using ODIN v3.11.1 | Android Guide."

Post a Comment