Guide to Flash / Install New Firmware on Samsung GALAXY NOTE EDGE With ODIN v3.11.1

Guide to Flash / Install New Firmware on Samsung GALAXY NOTE EDGE With ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY NOTE EDGE. There are some versions of these device, N915K/N915L/N915S (Korea), N915D (Japan), N915FY (Europe), N915G (Singapore, Australia, Spain), N915A (AT&T), N915T (T-Mobile), And now we will show you how to Flash or Install a new Firmware on Samsung GALAXY NOTE EDGE With ODIN v3.11.1. We highly recommend you using Samsung’s own utilities OTA (Over-the-air) or Samsung Kies to upgrade your software device. Use this guide only if you sure 98,1% about risks involved in flashing your Samsung GALAXY NOTE EDGE device.

This device is released on 2014, September. Samsung GALAXY NOTE EDGE is the smartphone with 5,6 Inches Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v4.4.4 (KitKat), upgradable to v6.0 (Marshmallow), Powered by Quad-core 2.7 GHz Krait 450 CPU, Qualcomm Snapdragon 805 chipset, Adreno 420 GPU, combined with 3 GB of RAM and 16 MP of  Main camera and 3,7 MP on secondary camera. 

Prerequisite.

Below is the following things you must do before flashing your Android Samsung GALAXY NOTE EDGE device.
  1. Make sure your Samsung GALAXY NOTE EDGE is fully charged. or minimum has 78% of battery capacity. It will avoid the flashing failure process.
  2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
  3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here 
  4. http://www.mediafire.com/download/p6pplwvwtc9y4kk/SAMSUNG_USB_Driver_for_Mobile_1.5.5.0.rar
  5. Original USB cable driver for your Samsung GALAXY NOTE EDGE.
  6. Download Odin V3.11.1, Here. 
  7. http://dl.sammobile.com/Odin3-v3.11.1.zip
  8. Firmware Download. (use one of the 3 methods below to download Samsung Firmware)
    • One. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit http://samsung-updates.com/
    • Two. Guide How to Download Official Samsung Firmware From SamMobile. Here 
    • http://guidebelajar.blogspot.com/2016/08/guide-how-to-download-official-samsung-firmware.html
    • Three. Firmware Samsung GALAXY NOTE EDGE, you must Log In to download firmware via this link below.

    • http://guidebelajar.blogspot.com/2016/10/firmware-stock-rom-samsung-galaxy-note-edge.html

Guide To Flash Samsung GALAXY NOTE EDGE 

  1. You must download all necessary file.(Samsung USB driver and Odin)
  2. Then, install all driver to your computer or PC.
  3. Extract Odin V3.11.1. file on the destination folder.
  4. Switch Off your Samsung GALAXY NOTE EDGE to start flashing process.
  5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY NOTE EDGE
    Flash Stock Firmware On Samsung GALAXY NOTE EDGE
  6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
    Flash Stock Firmware On Samsung GALAXY NOTE EDGE
    Flash Stock Firmware On Samsung GALAXY NOTE EDGE
  7. Now your firmware file has been inserted in Odin3 
    Flash Stock Firmware On Samsung GALAXY NOTE EDGE
    Flash Stock Firmware On Samsung GALAXY NOTE EDGE
  8. Then, Enter download mode your Samsung GALAXY NOTE EDGE. See this guide how to do it.
  9. http://guidebelajar.blogspot.com/2016/08/guide-how-to-enter-download-mode-on.html
  10. On this mode, now connect your Samsung GALAXY NOTE EDGE to your PC / laptop using a USB cable. 
  11. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
    Enter download mode samsung GALAXY NOTE EDGE
    Port Com Samsung GALAXY NOTE EDGE
  12. Make sure re-partition is NOT ticked
  13. When everything already you can click Start Button. at the bottom left corner
  14. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
  15. When complete it will display a notification PASS and your smartphone Samsung GALAXY NOTE EDGE will automatically restart.
  16. Wait your device to boot up, it will take a while.
  17. When your Samsung GALAXY NOTE EDGE is ready to use, now check your firmware version. See this guide how to check it. 
  18. http://guidebelajar.blogspot.com/2016/08/how-to-check-samsung-galaxy-firmware-version.html
  19. Finish.

0 Response to "Guide to Flash / Install New Firmware on Samsung GALAXY NOTE EDGE With ODIN v3.11.1"

Post a Comment