Guide How to Flash New Firmware on Samsung GALAXY E7 With ODIN v3.11.1


Guide How to Flash New Firmware on Samsung GALAXY E7 With ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY E7. These device Also known as Samsung Galaxy E7 Duos with dual-SIM card slots, There are some versions for this device, E700M/DS, E700M, E7009, E700F, E700F/DS, E700H, E700H/DD, E7000, E700H/DS, This article will explain you how to Flash or Install Firmware Samsung GALAXY E7 With ODIN v3.11.1. But we highly recommend using Samsung’s own utilities OTA (Over-the-air) or Samsung Kies only to upgrade your Samsung GALAXY E7 firmware. Use this guide only if you sure 100% about risks involved in flashing your Samsung GALAXY E7 device.

This device is released on 2015, January. Samsung GALAXY E7 is the smartphone with 5,5 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v4.4.4 (KitKat), upgradable to v5.1.1 (Lollipop), Powered by Quad-core 1.2 GHz Cortex-A53 CPU, Qualcomm MSM8916 Snapdragon 410 Chipset, Adreno 306 GPU, combined with 2 GB of RAM and 13 MP of  Main camera and 5 MP on secondary camera. 

Pre Requisite.

Below is the following things you must do before flashing your Android Samsung Smartphone device.
  1. Make sure your Samsung GALAXY E7 is fully charged. or minimum has 89% of battery capacity. It will avoid the flashing failure process.
  2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
  3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here 
  5. Original USB cable driver for your Samsung GALAXY E7.
  6. Download Odin V3.11.1, Here. 
  8. Firmware Download. (use one of the 3 methods below to download Samsung Firmware)
    • One. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit
    • Two. Guide How to Download Official Samsung Firmware From SamMobile. Here 
    • Three. Firmware Samsung GALAXY E7, you must Log In to download firmware via this link.
      • SM-E7000 - China (Open China), Hong Kong, Taiwan - Here 
      • SM-E7009 - China (China Telecom) - Here 
      • SM-E700F - Israel, Kenya, Iraq, Afghanistan, Pakistan, United Arab Emirates, Sri Lanka, Turkey, Singapore, Israel, Mauritius, Morocco, Thailand, Cambodia - Here 

      • SM-E700H - India, Nepal, Panama, Kenya, South Africa, United Arab Emirates, Mauritius, Egypt, Iran, Tunisia, Philippines, Indonesia, Malaysia, Bangladesh, - Here 
      • SM-E700M - Panama, Brazil, Trinidad, Tobago, Peru, Chile, - Here. 

Guide To Flash Samsung GALAXY E7 

  1. You must download all necessary file.(Samsung USB driver and Odin)
  2. Then, install all driver to your computer or PC.
  3. Extract Odin V3.11.1. file on the destination folder.
  4. Switch Off your Samsung GALAXY E7 to start flashing process.
  5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY E7
    Flash Stock Firmware On Samsung GALAXY E7
  6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
    Flash Stock Firmware On Samsung GALAXY E7
    Flash Stock Firmware On Samsung GALAXY E7
  7. Now your firmware file has been inserted in Odin3 
    Flash Stock Firmware On Samsung GALAXY E7
    Flash Stock Firmware On Samsung GALAXY E7
  8. Then, Enter download mode your Samsung GALAXY E7. See this guide how to do it. 

  10. On this mode, now connect your Samsung GALAXY E7 to your PC / laptop using a USB cable. 
  11. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
    Enter download mode samsung GALAXY E7
    Port Com Samsung GALAXY E7
  12. Make sure re-partition is NOT ticked
  13. When everything already you can click Start Button. at the bottom left corner
  14. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
  15. When complete it will display a notification PASS and your smartphone Samsung GALAXY E7 will automatically restart.
  16. Wait your device to boot up, it will take a while.
  17. When your Samsung GALAXY E7 is ready to use, now check your firmware version. See this guide how to check it.
  19. Finish.