Flash / Install New Firmware on Samsung GALAXY AVANT With ODIN v3.11.1 - Android Guide
Ads by Google

Flash / Install New Firmware on Samsung GALAXY AVANT With ODIN v3.11.1

Flash / Install New Firmware on Samsung GALAXY AVANT With ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY AVANT. Today's guidebelajar will show you how to Flash New Firmware on Samsung GALAXY AVANT, And we use an official flash tool from Samsung called ODIN. ODIN will help us to install a new firmware on Samsung device. Flashing your device will take a lot of risk, So we recommend you using Samsung’s own utilities OTA (Over-the-air) or Samsung Kies if you want to upgrade Samsung device. Use this guide only if you sure ninety nine percent about risk caused due flashing your Samsung GALAXY AVANT device.

Samsung GALAXY AVANT designed specially for T-Mobile, Also known as Samsung Galaxy Avant G386T. This device is released on 2014, July. Samsung GALAXY AVANT is the smartphone with 4,5 Inches TFT capacitive touchscreen, 16M colors, work on Android OS, v4.4.2 (KitKat), Powered by Quad-core 1.2 GHz Cortex-A7 CPU, Qualcomm MSM8226 Snapdragon 400 chipset, Adreno 305 GPU, combined with 1,5 GB of RAM and 5 MP of  Main camera and VGA on secondary camera. 

Prerequisite.

Below is the following things you must do before flashing your Android Samsung GALAXY AVANT device.
  1. Make sure your Samsung GALAXY AVANT is fully charged. or minimum has 99% of battery capacity. It will avoid the flashing failure process.
  2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
  3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here 
  4. Original USB cable driver for your Samsung GALAXY AVANT.
  5. Download Odin V3.11.1, Here
  6. Firmware Download. (use one of the 3 methods below to download Samsung Firmware)
    • One. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit http://samsung-updates.com/
    • Two. Guide How to Download Official Samsung Firmware From SamMobile. Here 
    • Three. Firmware Samsung GALAXY AVANT, you must Log In to download firmware via this link.
      • SM-G386T - USA (T-Mobile) - Here 
      • SM-G386T1 - USA (T-Mobile) - Here 
      • SM-G386W - USA (T-Mobile) - Here 

Guide To Flash Samsung GALAXY AVANT 

  1. Download all prerequisite file above
  2. Then, install all driver to your computer or PC.
  3. Extract Odin V3.11.1. file on the destination folder.
  4. Switch Off your Samsung GALAXY AVANT to start flashing process.
  5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY AVANT
    Flash Stock Firmware On Samsung GALAXY AVANT
  6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
    Flash Stock Firmware On Samsung GALAXY AVANT
    Flash Stock Firmware On Samsung GALAXY AVANT
  7. Now your firmware file has been inserted in Odin3 
    Flash Stock Firmware On Samsung GALAXY AVANT
    Flash Stock Firmware On Samsung GALAXY AVANT
  8. Then, Enter download mode your Samsung GALAXY AVANT. See this guide how to do it. 
  9. On this mode, now connect your Samsung GALAXY AVANT to your PC / laptop using a USB cable. 
  10. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
    Enter download mode samsung GALAXY AVANT
    Port Com Samsung GALAXY AVANT
  11. Make sure re-partition is NOT ticked
  12. When everything already you can click Start Button. at the bottom left corner
  13. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
  14. When complete it will display a notification PASS and your smartphone Samsung GALAXY AVANT will automatically restart.
  15. Wait your device to boot up, it will take a while.
  16. When your Samsung GALAXY AVANT is ready to use, now check your firmware version. See this guide how to check it. 
  17. Finish.

Advertisement

Subscribe to receive free email updates:

0 Response to "Flash / Install New Firmware on Samsung GALAXY AVANT With ODIN v3.11.1"

Post a Comment