How to Flash / Install Firmware Samsung GALAXY TAB PRO 12.2 LTE Using ODIN v3.11.1 - Android Guide
Ads by Google

How to Flash / Install Firmware Samsung GALAXY TAB PRO 12.2 LTE Using ODIN v3.11.1

How to Flash / Install Firmware Samsung GALAXY TAB PRO 12.2 LTE Using ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY TAB PRO 12.2 LTE. This device Also known as Samsung SM-T905. This method below show you how to flash / install a new firmware on Samsung GALAXY TAB PRO 12.2 LTE. Use this method to unbrick this device, or upgrade to the latest software version. But, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air) to upgrade your software. Use this guide if you are 99% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This device is released on 2014, January. Samsung GALAXY TAB PRO 12.2 LTE is the smartphone with 12.2 Inchi Super clear LCD capacitive touchscreen, 16M colors, work on Android OS, v4.4 (KitKat), with Quad-core 2.3 GHz Krait 400 CPU, Qualcomm Snapdragon 800 chipset, Adreno 330 GPU, combined with 3 GB of RAM and 8 MP of  Main camera and 5 MP on secondary camera. 

Preparation.

Below is the following things you must do before flashing your Android Samsung Smartphone device.
  1. Make sure your Samsung GALAXY TAB PRO 12.2 LTE is fully charged. or minimum has 80 % of battery capacity. It will avoid the flashing process failure.
  2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
  3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here 
  4. Original USB cable driver for your Samsung GALAXY TAB PRO 12.2 LTE.
  5. Download Odin V3.11.1, Here 
  6. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit samsung-updates.com/
  7. Or you can read Guide How to Download Official Samsung Firmware From SamMobile. Here 
  8. Firmware Samsung GALAXY TAB PRO 12.2 LTE. you must Log In to download firmware via this link.

Guide To Flash Samsung GALAXY TAB PRO 12.2 LTE 

  1. You must download all necessary file.(Samsung USB driver and Odin)
  2. Then, install all driver to your computer or PC.
  3. Extract Odin V3.11.1. file on the destination folder.
  4. Switch Off your Samsung GALAXY TAB PRO 12.2 LTE to start flashing process.
  5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 LTE
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 LTE
  6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 LTE
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 LTE
  7. Now your firmware file has been inserted in Odin3 
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 LTE
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 LTE
  8. Then, Enter download mode your Samsung GALAXY TAB PRO 12.2 LTE. See this guide how to do it.
  9. On this mode, now connect your Samsung GALAXY TAB PRO 12.2 LTE to your PC / laptop using a USB cable. 
  10. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
    Enter download mode samsung GALAXY TAB PRO 12.2 LTE
    Port Com Samsung GALAXY TAB PRO 12.2 LTE
  11. Make sure re-partition is NOT ticked
  12. When everything already you can click Start Button. at the bottom left corner
  13. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
  14. When complete it will display a notification PASS and your smartphone Samsung GALAXY TAB PRO 12.2 LTE will automatically restart.
  15. Wait your device to boot up, it will take a while.
  16. When your Samsung GALAXY TAB PRO 12.2 LTE is ready to use, now check your firmware version. See this guide how to check it. 
  17. Finish.


  18. Warning.
Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you don't see a sign in Odin.
Flash your Samsung GALAXY TAB PRO 12.2 LTE device at your own risk.
Flashing firmware which contains more than one *.tar.md5 file will wipe all data on internal storage.  Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung GALAXY TAB PRO 12.2 LTE device's warranty. 

Advertisement

Subscribe to receive free email updates:

0 Response to "How to Flash / Install Firmware Samsung GALAXY TAB PRO 12.2 LTE Using ODIN v3.11.1"

Post a Comment