How To Flash / Install Firmware Lenovo A328.

How To Flash / Install Firmware Lenovo A328.


Flash / Install Firmware Lenovo A328. Guidebelajar on this guide will explain to you how to flashing android device on Lenovo A328 with an easy and simple stepFlashing in android is the same way like a fresh install on the windows PC, So by performing a flash on Android, you will give a new performance to a new phone. One reason that you should perform a flash your android is because your Android gets a boot loop or when you failed to install Stock ROM Mod.

So, If you have any problems with Lenovo A328 boot loop or accidental Lenovo A328 is not installed recovery. In this guide, I'm not offering recovery TWRP or Cwm. CMW is a recovery that already in recovery mode for customization of the device such that the Lenovo A328 with a variety of additional functions in it such as backup/restore, installations and others that are not contained in the standard recovery mode. Generally, in case of a default recovery bootloop, Lenovo A328 will go missing in case of boot loop. whereas the original recovery cannot help when there hard brick.

Now, follow the instructions list below, do it at your own risk.

Prepare Flash Lenovo A328.

  1. Firmware Lenovo A328.  
  2. | Alternative Link. 
  3. Latest Version of flash tool :  
  4. Lenovo A328 USB Driver :  
  5. To ensure what is firmware used by your device, you can check by going to Setting ->About -> Software Information ->Build Number.

Flashing Lenovo A328.

  1. At the first time, please Install driver for Lenovo A328 that already downloaded before. 
  2. Extract the other downloaded file (firmware and flash tool) save it anywhere on your hard drive.
  3. Then remove your back case, battery (if removable) sim card and SD Card  if installed
  4. Next, Connect your Lenovo A328 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
  5. Then, release USB data cable from the PC.
  6. Open SP flash tool software and click scatter load. find Lenovo A328 scatter storage location earlier.
  7. In the Scatter-Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt.
  8. Flash / Install Firmware Lenovo A328.
    Flash / Install Firmware Lenovo A328.
  9. Then you click options ->Download -> then check DA DL all with a checksum.
  10. Flash / Install Firmware Lenovo A328.
    Flash / Install Firmware Lenovo A328.
  11. On the download tab, ensure you have selected download only option from the drop-down menu, see below picture.
  12. Flash / Install Firmware Lenovo A328.
    Flash / Install Firmware Lenovo A328.
  13. Then, click the download button on top right and connect your Lenovo A328 with a USB cable in phone switch off position.
  14. Flash / Install Firmware Lenovo A328.
    Flash / Install Firmware Lenovo A328.
    .
  15. The process will run automatic, and you can see the red stripe showing download percentage at bellow
  16. When your process complete, you can see a green circle with a tick mark. 
    Flash / Install Firmware Lenovo A328.
    Flash / Install Firmware Lenovo A328.
  17. Now disconnect your Lenovo A328
  18. Install your battery again. 
  19. Then, start your Lenovo A328. (remember, on the first booting it will take a long time to start)
  20. Success. enjoy

Download Firmware Lenovo A328. Here

0 Response to "How To Flash / Install Firmware Lenovo A328."

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel