Guide to Flash / Install Firmware Samsung GALAXY NOTE 3 NEO Using ODIN v3.11.1 | Android Guide

Guide to Flash / Install Firmware Samsung GALAXY NOTE 3 NEO Using ODIN v3.11.1

Guide to Flash / Install Firmware Samsung GALAXY NOTE 3 NEO Using ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY NOTE 3 NEO. This device has two versions, Samsung GALAXY Note 3 Neo 3G N750 and Samsung GALAXY Note 3 Neo LTE+ N7505. both of these device is a GSM device. This method below show you how to flash / install a new firmware on Samsung GALAXY NOTE 3 NEO. Use this method to unbrick this device, or upgrade to the latest software version. But, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air) to upgrade your software. Use this guide if you are 99% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This device is released on 2014, January. Samsung GALAXY NOTE 3 NEO is the smartphone with 5,5 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v4.3 (Jelly Bean), v4.4.2 (KitKat), upgradable to v5.1.1 (Lollipop), Support with Hexa-core (4x1.3 GHz Cortex A7 & 2x1.7 GHz Cortex A15) CPU,Exynos 5260 Hexa chipset, Mali-T624 MP4 GPU, combined with 2 GB of RAM and 8 MP of  Main camera and 2 MP on secondary camera. 

Preparation.

Below is the following things you must do before flashing your Android Samsung Smartphone device.
  1. Make sure your Samsung GALAXY NOTE 3 NEO is fully charged. or minimum has 80 % of battery capacity. It will avoid the flashing process failure.
  2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
  3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here 
  4. http://www.mediafire.com/download/p6pplwvwtc9y4kk/SAMSUNG_USB_Driver_for_Mobile_1.5.5.0.rar
  5. Original USB cable driver for your Samsung GALAXY NOTE 3 NEO.
  6. Download Odin V3.11.1, Here 
  7. http://dl.sammobile.com/Odin3-v3.11.1.zip
  8. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit samsung-updates.com/
  9. Or you can read Guide How to Download Official Samsung Firmware From SamMobile. Here 
  10. http://guidebelajar.blogspot.com/2016/08/guide-how-to-download-official-samsung-firmware.html
  11. Firmware Samsung GALAXY NOTE 3 NEO. (you must Log In to download firmware via this link)
    • SM-N750  - Bangladesh, Uzbekistan, India, Russia, Cambodia, Vietnam, Indonesia, Malaysia, Nigeria, Tunisia, Morocco, Egypt, Pakistan, Libya, Afghanistan, Panama, Trinidad, Tobago, United Arab Emirates, (Here)  
    • http://www.sammobile.com/firmwares/database/SM-N750/

    • SM-N7505  - Bangladesh, Uzbekistan, India, Russia, Cambodia, Vietnam, Indonesia, Malaysia, Nigeria, Tunisia - (Here
    • http://www.sammobile.com/firmwares/database/SM-N750/

Guide To Flash Samsung GALAXY NOTE 3 NEO 

  1. You must download all necessary file.(Samsung USB driver and Odin)
  2. Then, install all driver to your computer or PC.
  3. Extract Odin V3.11.1. file on the destination folder.
  4. Switch Off your Samsung GALAXY NOTE 3 NEO to start flashing process.
  5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY NOTE 3 NEO
    Flash Stock Firmware On Samsung GALAXY NOTE 3 NEO
  6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
    Flash Stock Firmware On Samsung GALAXY NOTE 3 NEO
    Flash Stock Firmware On Samsung GALAXY NOTE 3 NEO
  7. Now your firmware file has been inserted in Odin3 
    Flash Stock Firmware On Samsung GALAXY NOTE 3 NEO
    Flash Stock Firmware On Samsung GALAXY NOTE 3 NEO
  8. Then, Enter download mode your Samsung GALAXY NOTE 3 NEO. See this guide how to do it. 
  9. http://guidebelajar.blogspot.com/2016/08/guide-how-to-enter-download-mode-on.html
  10. On this mode, now connect your Samsung GALAXY NOTE 3 NEO to your PC / laptop using a USB cable. 
  11. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
    Enter download mode samsung GALAXY NOTE 3 NEO
    Port Com Samsung GALAXY NOTE 3 NEO
  12. Make sure re-partition is NOT ticked
  13. When everything already you can click Start Button. at the bottom left corner
  14. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
  15. When complete it will display a notification PASS and your smartphone Samsung GALAXY NOTE 3 NEO will automatically restart.
  16. Wait your device to boot up, it will take a while.
  17. When your Samsung GALAXY NOTE 3 NEO is ready to use, now check your firmware version. See this guide how to check it. 
  18. http://guidebelajar.blogspot.com/2016/08/how-to-check-samsung-galaxy-firmware-version.html
  19. Finish.


  20. Warning.
Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you don't see a sign in Odin.
Flash your Samsung GALAXY NOTE 3 NEO device at your own risk.
Flashing firmware which contains more than one *.tar.md5 file will wipe all data on internal storage.  Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung GALAXY NOTE 3 NEO device's warranty. 

0 Response to "Guide to Flash / Install Firmware Samsung GALAXY NOTE 3 NEO Using ODIN v3.11.1"

Post a Comment